Hook & Loop Wool Felt Polishing Pad

This product is made of high-density wool felt bonded with a strong hook-and-loop backing. It combines the cutting power of wool with the stability of felt. The hook-and-loop design allows quick pad changes and fits most electric or pneumatic polishers. Ideal for automotive paint polishing, metal/stone/wood mirror finishing, and light to medium scratch removal.

Hook & Loop Backing – Strong adhesion, easy to change, compatible with 3–6 inch backing plates.

Wool Felt Material – Denser than ordinary wool pads, provides even cutting and minimal linting.

Heat & Wear Resistant – Suitable for medium to high speed polishing (3,000–6,000 RPM).

Flat Edge Design – Reduces the risk of paint scratching, ideal for fine finishing.

Reusable – Easily cleaned with compressed air or a pad brush.

Automotive paint polishing & mirror finishing

Metal / stainless steel / aluminum finishing (brushed or mirror)

Stone, engineered stone, and wood polishing

1.Align and attach the hook-and-loop side to the polishing machine backing plate.

2.Apply a pea-sized amount of polishing compound to the pad or surface.

3.Start at low speed (~2,000 RPM) to spread the compound, then increase speed for cutting/finishing.

4.After use, clean the felt surface with compressed air or a dedicated pad brush.

5.Do not use for dry sanding or on rough/gritty surfaces.